You can initially configure the entire stack from any member switch.Ĭonnecting the RJ-45 Console Port or USB Console Port Note If you have stacked your switches, connect to the console port of one of the switches in the stack. You can access the CLI on a configured or unconfigured switch by connecting the RJ-45 console port or USB console port of the switch to your PC or workstation and accessing the switch through a terminal emulation program. Accessing the CL I Through the Console Port You lose the Telnet connection after entering the write memory command.įor information about using the CLI, see the switch command reference for this release. Note In Express Setup mode, the IP address 10.0.0.1 remains active on the switch until you enter the write memory command. Enter the information described in the “IP Settings” section and the “Completing the Setup Program” section.Īfter you have entered the configuration information for the switch, save it to flash memory by using the write memory privileged EXEC command. When the switch is in Express Setup mode, open a Telnet session to the switch by entering the IP address 10.0.0.1.
Follow the steps described in the getting started guide for turning on the switch and using Express Setup. Set the switch in Express Setup mode and connect a switch Ethernet port to an Ethernet port on your PC or workstation. After download and installing, 2 or 3 steps help you to run PuTTY successfully.You can access the CLI on an unconfigured switch. The Close Window on Exit option helps the user decide whether they want the PuTTY terminal has to be closed as the session ends or to restart the session on Termination. To delete the season, the Users have this option.To modify the save session, the panel permits by first loading a session, editing everything you want to modify, i.e., making changes, and finally clicking the Save button.In the respective box of the configuration panel, the save setting will appear. After saving it, you can select the save session and click on Load.The “Load, save or delete a stored session” helps you set some connection without acknowledging all the details.The Serial Line and Speed will replace the Host Name and Port Bars once you select the Serial as the connection type.If you choose the Raw Type, the bar stays blank, and users have to enter the port manually. Once you select the type of connection, the Port Bar has filled automatically.Radio button Connection Type will allow the user to connect to the network of their choice.The Host Name Bar (or IP Address) in this user has to input the name or the IP Address of the server.You need to specify the specific options in the preliminary panel to open a session.
0 kommentar(er)
